Connecting The Camera To A Computer - Ricoh Caplio 300G Operation Manual

Connecting the Camera to a Computer

After installing the software on your computer, connect your camera to it.
Make sure the power is off.
Connect the USB cable to the USB port of
your computer.
Open the terminal cover.
Connect the USB cable to its USB terminal.
Your camera turns on.
Disconnecting your camera from computer
1. Turn your camera off by pressing the power button.
2. Unplug the USB cable.
• When you are downloading images from your camera, the AC Adaptor (sold separately) is recommended.
Chapter 2 / Section 2 Downloading Images to a Computer (For Macintosh)
131