Configuring Network Scanning For Macintosh - Brother MFC-J6510DW Software User's Manual

Network Scanning

Configuring network scanning for Macintosh

If you want to scan from the machine on a network, you must choose the networked machine in the
Device Selector application located in Macintosh HD/Library/Printers/Brother/Utilities/DeviceSelector or
from the Model drop-down list in the main screen of ControlCenter2. If you have already installed the
MFL-Pro Suite Software following the network installation steps in the Quick Setup Guide then this selection
should already be made.
To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can
set or change the address settings from the control panel. (See Control Panel Setup in the Network User's
Guide.)
a
From Library, choose Printers, Brother, Utilities and DeviceSelector, and then double-click
Device Selector.
The Device Selector window appears. This window can also be opened from ControlCenter2.
For more information, see Using ControlCenter2 on page 152.
b
Specify your machine by IP address or mDNS service name. To change the IP address, enter the new
IP address.
You can also choose a machine from the list of the machines available. Click Browse to show the list.
c
Click OK.
13
13
187