Configuring Network Scanning For Macintosh - Brother MFC-J4410DW Software User's Manual

Network Scanning
d
Click the Scan To Button tab and enter your computer name in the Display Name field. The machine's
LCD displays the name you enter. The default setting is your computer name. You can enter any name
that you like.
e
If you want to avoid receiving unwanted documents, enter a 4-digit PIN number in the Pin number and
Retype Pin number field. To send data to a computer protected by a PIN number, the LCD prompts you
to enter the PIN number before the document can be scanned and sent to the computer. (See Using the
Scan button on your network on page 195.)

Configuring network scanning for Macintosh

If you want to scan from the machine on a network, you must choose the networked machine in the
Device Selector window. The Device Selector window can be opened from the Model pop-up menu in the
main screen of ControlCenter2. If you have already installed the MFL-Pro Suite software following the
network installation steps in the Quick Setup Guide then this selection should already be made.
To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can
set or change the address settings from the control panel. See Network User's Guide: Control Panel Setup.
a
Click the icon and choose Open. The ControlCenter2 window will open.
b
Choose Other from the Model pop-up menu in the main screen of ControlCenter2. The Device Selector
window appears.
c
Specify your machine by IP address or mDNS service name. To change the IP address, enter the new
IP address.
You can also choose a machine from the list of the machines available. Click Browse to show the list.
13
13
193