Network Manager - Renkus-Heinz CF Series RHAON User Manual

Users Manual
SERVICING and TROUBLE SHOOTING (Continued)
RHAON Network Manager
To activate the RHAON Network Manager open RHAION and select Network Manager from the File pull down menue.
The Network Manager will scan the Ethernet network, list all the CobranNet devices it found on the network and identify them by name,
Error column along with a code number identifying the type of error. Notice that the error count continues to increase as the Network Man-
ager continues to scan the network for errors. In the example shown below the ICL-FR Left array obviously has a problem while two other
devices are showing an occasional glitch.
The Age column shows in milliseconds how long it has been since the device was checked by the Network Manager. It is normal for the
The Startup IP column will show the device's Startup IP address, if a startup IP was
assigned to it. To assign a startup ID to a single device, double right click on one of the
a power disruption to the device. You can also assign Startup IP addresses to all the
devices at one time by clicking on the Command pull down menu and selecting Reset all
IP Addresses as Startup.
The Error Code Reference Guide is accessed from the RHAON Help pull down menu.
47