Updating Microcontroller Firmware - Renkus-Heinz CF Series RHAON User Manual

Users Manual

Updating Microcontroller Firmware

improved.
Help pull down menu. See page 39.
Step 1: Open RHAON, scan the network and switch to either the Control or Su-
pervise mode. Then right click on the loudspeaker's listing in the directory tree or
on the loudspeaker's icon in the main display area to open a pop up menu.
The pop up menu will vary depending on which method you choose.
If you choose the loudspeaker's listing under the Network sub directory, the menu
the loudspeakers Wink light and for sending pink noise to the loudspeaker to help
you identify which loudspeaker you have selected.
The menu in Figure 2 will appear if you opened the menu through its listing in the
All Loudspeakers section of the directory tree. Notice that it also allows you to set
up an interface with SysTune. The interface allows SysTune users to access the
observing the results in SysTune.
SpeakerLab program.
Accessing the pop up menu by right clicking on the Loudspeaker's icon produces
the window shown in Figure 3. It is similar to the previous menu, except for not
allowing you to Rename the loudspeaker.
will need to make sure the Loudspeaker is in the "Power On' mode. Check the
indicator in the RHAON screen is Green.
If not, either click the Power button in RHAON or use the Volume Up and Volume
40
Figure 1
Figure 2
Figure 3