Resetting The Lamp Operating Time - Epson EMP-7850 Quick Reference Manual

Resetting the Lamp
Operating Time
After replacing the lamp, be sure to reset the Lamp Operating Time from the configuration menu.
Press .
Select "About"
"Reset Lamp Timer"
and press
Select "Yes" then
press .
Do not reset the Lamp Operating Time except after the lamp has been replaced. If you do, the Lamp
Operating Time will no longer be displayed correctly.
Lamp Lamp : 1900H 1900H
Reset Lamp Timer Reset Lamp Timer :
:
Source Source Computer Computer
Input Signal Input Signal : Analog-RGB Analog-RGB
:
. Frequency Frequency H ---.--kHz H ---.--kHz
: V ---.--Hz V ---.--Hz
:
SYNC Polarity SYNC Polarity H ------ H ------
V ------ V ------
:
SYNC Mode SYNC Mode : ------ ------
:
Resolution Resolution 0x 0 0x 0
:
Refresh Rate Refresh Rate 0.0 Hz 0.0 Hz
Reset Lamp Timer Reset Lamp Timer
Execute? Execute?
YES YES
The configuration menu is displayed.
Execute Execute
The Lamp Operating Time is reset.
NO NO