Table of Contents
Advertisement
Setting Menu
The Setting menu enables you to adjust basic settings that
normally do not need changing.
Menu item
Prompt
Color Temp.
Ceiling
Rear Proj.
Blank (AV/ Mute) Selects what should be projected when the projector's
Video Signal
44
Using the Projector Menus
Description
Temporarily displays a prompt on the projector screen
to identify which source (computer or video) is
providing the image.
Adjusts the whiteness of the screen. Decreasing the
setting provides warm white, and increasing the setting
provides cold white. Use the pointing button(remote) or
the <Left> and <Right> buttons(control panel) to
change the value.
Press the <Menu> button to clear the setting screen
and return to the Main Menu.
Mirrors the projected images vertically (top-bottom)
and horizontally (left-right). Selecting ON turns
mirroring on, while OFF turns it off (for a normal
image). Turn this option on when hanging the projector
upside-down from the ceiling.
Mirrors the projected images horizontally (left-right).
Selecting ON turns mirroring on, while OFF turns it off
(for a normal image). Turn this option on when
projecting from behind onto a transparent screen being
viewed from the opposite side.
Blank button is pressed to blank the screen. You can
select either a black screen, a blue screen or a user
logo. A user logo can be created using the optional
ELP Link III software.
Specifies input image signal mode. Press either multi-
purpose button(remote) or the <Enter> button (control
panel) to display the video signal system window.
User can select from AUTO, NTSC, NTSC 4.43, PAL,
PALN, PALM, PAL60 and SECAM.
Advertisement
Table of Contents
