Replacing The Air Filter - Epson EMP-74 User Manual

Maintenance

Replacing the Air Filter

The air filter can be replaced even if the projector is installed to a ceiling.
PROCEDURE
Turn the projector power off, wait for the
1
period to end, then disconnect the power cable.
The cool-down period lasts for about 20 seconds.
Put your finger into the recess in the knob of the air
2
filter cover, and lift up the air filter cover to remove it.
cool-down
Knob
Replace the air filter with a new one.
3
Remove the old air filter, and install the new air filter. Place the
new air filter so that it does not slip into the air intake vent.
Install the air filter cover.
4
First insert the tabs, then press down on the opposite side until it
clicks into place.
Tabs
TIP
Dispose of used air filters properly in accordance with your local
regulations.
89