Table of Contents
Advertisement
SETUP MENU
TUNING
BAND
Purpose
Allows for setting the TV tuner to match your antenna or
cable-TV system.
If you used the AUTO CH. SEARCH feature, the proper
BAND was set automatically for your TV. If you did not use
AUTO CH. SEARCH, or you are having difficulty tuning
channels, the:TUNING BAND may have to be set manually
to match your viewing needs.
Before Using TUNING BAND
Connect and turn ON all external equipment,
such as a
cable-TV decoder, VCR, etc. Use CH. AUTO SEARCH,
if not previously used.
NOTE: TUNING BAND can only be used with ANT/
CABLE 1 or 2 Source selection.
To Use TUNING BAND
1.
TUNING
BAND
should be selected
if you followed
the =Basic
Menu
Operation"
given
in the "On-
Screen Menu"
section.
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
CH. LABELS
'_ TUNING BAND
AUTO FINE TUNE
CLOCK SET
CAPTIONS
CH. BACKGROUND
CABLE-CAW
Selecting Tuning Band
2.
Press
ADJUST
(ADJ')
LeftlRight
to select
the
desired
tuning band, as shown below:
•
BROADCAST
is used for standard
over-the-air
broadcasts.
*
Cable - CATV is m.ed for most standard
cable-T\
(CA.TV) systems.
,
Cable - HRC is use:l for cable-T%' systems that use
HRC (Harmonically
Related Carrier).
•
Cable - ICC is used for cable-TV systems using ICC
(Incremental
Coherent Carrier).
Available Channels per Band
The channels that are available in the broadcast
and cable
tuning bands are shown beIos_
BROADCAST Band
VHF 2 to 13
UHF 14 to 69"
"
Channels above 69 are not selectable.
CATV, HRC and ICC Eamds
1 tO 1.2.5" *
*" Channels above 125 _xe not selectable.
When Some Channels Are Not Clear
If some channels are not dear, change the AUTO FINE
TUNE. You may have to try different TUNING
BAND ant
AUTO FINE TUNE combi_.ation.s until you get a clear pic-
ture, channel-to-channel. Refer to the AI._'O FINE TUNE
option for details.
AUTO FINE TUNE
Purpose
Lets your TV compensate for variations in broadcast and
cable-'l-v' frequencies.
If you are having difficulty tuning channels, the AUTO
FINE TUNE. may have to be set manually to match your
viewing needs.
Before Using AUTO FINE TUNE
Connect z(nd turn ON all external equipment,
such as cable-
TV decoder, VCR, etc.
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
CH. LABELS
TUNING BAND
AUTO FINE TUNE
CLOCK SET
CAPTIONS
CH. BACKGROUND
FIXED
Selecting Auto Fine Tune
NOTE: AUTO FINE TUNE can only be used with ANT/
CABLE 1 or 2 Source select!ion.
To Use AUTO FINE TUNE
t.
AUTO FINE TUNE :_hould be selected
if you fo
lowed
the "Basic
Menu
Operation"
given in th
=On-Screen
Menu" section.
2.
Press
ADJUST
(ADJ)
Left/Right
to select
th
desired
mode of operation,
as foUows.
•
FIXED is used to re:eive "over-the-air"
TV station
and with many cable-TV systems.
•
SEARCH
is used o:aly when the TV must search
find the frequency being received, such as when use
with certain VCRs and video game controllers.
When Some Channels An: blot Clear
If some channels are not clear, change the TUNING
BAND. You may have to _tr)different AUTO FINE TUN[
and TUNING
BAND settings until you get a consistently
clear picture, channel-to-channel.
Refer to the TUNING
BAND option for details.
:,.sso-o
9 - 3
Advertisement
Table of Contents
