Table of Contents
Advertisement
CONNECTIONS
FOR YOUR
TV
:STEP 1. MAKE
BASIC
CONNECTION
TO TV (CONTINUED)
C.
Cable-T_
Connection
to TV
If You Do Not Have a ConverterlDecoder
Box:
1.
Connect
the 75-ohm cable-TV
input directly to
the ANT/CABLE
1 jack.
If You Have a Converter/Decoder
Box:
I
!
1.
Connect
the
75-ohm
cablc-TV
input
to the
K
ANT/CABLE
2 jack on the TV.
2.
Connect
a 75-ohm cable from the LOOP OUT
jack on the TV to the IN jack on the decoder/
converter.
3.
Connect
a 75-ohm cable from the OUT jack on
the decoder/converter
to the ANT/CABLE
1
jack on the TV.
,I
I
I
[
DECODER/
CONVFRTER
CABLE -'IV----.
CH 5/4
I
I
Y
II
IP
II
I
LOOP OUT
ANTK;ABLE 2
AN'T/CABLE 1
TO OECOOER
D. Cable-TV Connection
to VCR and "IV
If You Do Not Have
a Converter/Decoder
Box:
1.
Connect
the 7S-ohm cable-TV
input directly to
the ANT/CABLE
2 jack.
2.
Connect
a 75-ohm
cable from the LOOP
OUT
jack: on the TV to the antenna
IN jack on the
VCR.
3.
Connect
a 75-ohm cable from the antenna OUT
jack on the VCR to the ANT/CABLE
1 jack on
the TV.
If You Have a Converter/Decoder
Box:
1.
Connect
the 75-ohm cablc-TV
input directly to
the ANT/CABLE
2 jack.
2a. Copnect
a 75-ohm cable from the LOOP
OUT
jack on the TV to the IN jack on the decoder/
converter.
2b. Connect
a 75-ohm cable from the OUT jack on
the decoder/converter
to the antenna
IN jack
on the VCR.
3.
Connect
a 75-ohm cable from the antenna OUT
jack on the VCR to the ANT/CABLE
1 jack on
the TV.
LOOP OUT
AWI'IC_I_J.E2
AI_RICABLE 1
TO DECODER
NOTE:
If you have
a stereo
VCR,
you must
make
the AIV
connections
described
in Step 2 for you to hear stereo
sound while playin[_ a tape.
_1.o
1 -3
Advertisement
Table of Contents
