Table of Contents
Advertisement
AUDIO
MENU
AUDIO
SURROUND
U.-c ADJUST
(ADJ) LeWgight toselect t hespeakeraudio
output mode. You may chooseeither STEREO, MONO or
2ND AUDIO/SAP.
If STEREO is selected but not •
received, the following line appears at the bottom of the
menu:
THIS PROGRAM
IS NOT IN STEREO
If 2N'D AUDIO/SAP
isselected but not received, the fol-
lowing line appeaxs at the bottom of the menu:
THIS PROGRAM
HAS NO 2ND AUDIO
In either of these cases, the Channel!Time display will al-
ways show what type of AUDIO signal is bging received
and has been selected default.
If you choose STEREO,
you may want to enable Surround
sound by using the SURROUND
option.
SEQ (Spatial
Equalization)
Use ADJUST (ADJ) Left/Right to turn SEQ ON or OFF.
SEO improves tonal balance and increases apparent stereo
separation
to produce
a spadous and more natural s ound.
Music and sounds appear to emanate from points outside
the television set, while dialogue is localized within the pic-
ture.
SEQ is only available if a stereo signal is being received and
you have previously selected STEREO
using the AUDIO
option or if,STEREO is selected by defaulL
If no stereo signal is being receh_.€l, the words NOT
AVAILABLE
appear next to SEQ, and the following line
appears
at the bottom of the menu"
THIS PROGRAM
IS NOT IN STEREO
If your AUDIO selection is either MONO
or 2ND
AUDIO/SAP,
the words NOT AVAILABLE
appear next
to SEO and one of the following ; aes appear at the bottom
of the menu:
MONO
HAS
BEEN
SELECTED
2ND AUDIO
HAS BEEN SELECTED
Some weak or nonstandard
signals may not be suitable for
SEQ, which may make imperfecticms m the audio transmis-
sion more obvious. Turn SEO off if flKs condition exists.
NOTE: If SEQ is available, you can turn SEO ON or OFF
directly by pressing SEQ on the remme control
Use ADJUST (ADJ) Left!Right to adjust the level of Sur-
round sound you wish to obtain. To decrease
(-)
Surround
sound, press ADJUST
(AIDJ) Left. To im:rca__se ( + ) Sur-
round round, press ADIUST (ADJ) Rigkt.
SURROUND
round is oMy available if a stereo signal is
being received and you haw: previously selected STEREO
using the AUDIO option or if STEREO is selected by
default.
When SURROUND
is activated, "SURROUND
SPEAKERS
REOUIRED"
appears at the bottom of the
menu. Thisis a reminder flint surround sound is onlyavail-
able when you have optic,n_l surround Sl_-.akers connected
to the SURROUND
SP£_KER
jack. The TWs internal
speakers do notproducesurround sound.
If no stereo..signal is be_
rcccivgd,the words NOT
AVAILABLE
appear next to SURROUND,
and the fol-
lowing ilne appears at the bottom of the menu:
THIS PROGKAId IS NOT IN STEREO
If your AUDIO sele.ctiort is either MONO or 2ND
AUDIO/SAP,
the words NOT AVAILKBLE
appear next
toSURROUND
and on,_ ofthefollowing lines a ppearat
the bottom of the menu:
MONO HAS BEEN SELECTED
2ND AUDIO
ILtkS BEEN SFALECrED
NOTES
1.
Continuously
pressing
ADJ
Left
automatically
turns Surround
speakers
OFF.
2.
If the current
progra:m
is not in stereo,
you will not
be able to change:
the SURROUND
option.
The.
status
display shows "THIS PROGRAM
IS NOT IN
STEREO."
3.
If Surround
speakers
are
not
used,
set
SUR-
ROUND
option
to OFF for optimum
stereo
sound
reproduction.
4.
If you are in the SURROUND
menu
option
and
press
MUTE
on the remote
control,
only the Sur-
round speakers
are :muted.
10 -2
Advertisement
Table of Contents
