Brother MFC-J4410DW Network User's Manual page 74

Troubleshooting
The Brother machine is not found on the network during the MFL-Pro Suite installation. (continued)
Question
Are there any obstructions
(walls or furniture, for
example) between your
machine and the WLAN
access point/router?
Is there a wireless
computer, Bluetooth
supported device,
microwave oven or digital
cordless phone near the
Brother machine or the
WLAN access point/router?
The Brother machine cannot print or scan over the network.
The Brother machine is not found on the network even after successful installation.
Question
Are you using security
software?
Is your Brother machine
assigned with an available
IP address?
Interface Solution
wireless Move your Brother machine to an obstruction-free area, or closer to the
WLAN access point/router.
wireless Move all devices away from the Brother machine or WLAN access
point/router.
Interface Solution
wired/ See I'm using security software. on page 70.
wireless
wired/  Confirming the IP address and the Subnet Mask.
wireless
Verify that both the IP addresses and Subnet Masks of your computer
and the Brother machine are correct and located on the same network.
For more information on how to verify the IP address and the Subnet
Mask, ask the network administrator or visit the Brother Solutions Center
at http://solutions.brother.com/.
®
 (Windows )
Confirming the IP address and the Subnet Mask using the Network
Connection Repair Tool.
Use the Network Connection Repair Tool to fix the Brother machine's
network settings. It will assign the correct IP address and Subnet Mask.
To use the Network Connection Repair Tool follow the steps below:
NOTE
®
• (Windows
Administrator privileges.
• Make sure that the Brother machine is turned on and is
network-connected to your computer.
®
XP/Windows Vista /Windows
®
7) Login to the network with
9
68