Error Mail - Brother MFC-J4410DW Network User's Manual

Internet fax (For MFC models) (Available as a download)
when the machine or user reads or prints the received Internet Fax or E-mail. For example, if the message is
opened for reading or is printed the receiver sends back a notification to the original sending machine or user.
The receiver must support the MDN field in order to be able to send a notification report, otherwise the request
will be ignored.
Setup Mail RX
There are three possible settings for this option On, MDN or Off.
Receive Notification "On"
When switched to "On" a fixed message is sent back to the sender to indicate successful reception and
processing of the message. These fixed messages depend on the operation requested by the sender.
Report messages consist of:
SUCCESS: Received From <Mail Address>
Receive Notification "MDN"
When switched to "MDN" a report as described above is sent back to the sender if the originating station sent
the "MDN" field to request confirmation.
Receive Notification "Off"
Off switches all forms of receive notification Off, no messages are sent back to the sender regardless of the
request.
NOTE
To receive the TX verification mail properly, you must configure the following settings.
• Sender
• Switch Notification in the Setup Mail TX to On.
• Switch Header in the Setup Mail RX to All or Subject+From+To.
• Receiver
• Switch Notification in the Setup Mail RX to On.

Error mail

If there is a mail delivery error while sending an Internet fax, the mail server will send an error message back
to the machine and the error message will be printed. If there is an error while receiving mail, an error
message will be printed (Example: "The message being sent to the machine was not in a TIFF-F format.").
To receive the error mail properly, you must switch Header in the Setup Mail RX to All or Subject+From+To.
7
7
7
61