Brother MFC-J4410DW Network User's Manual page 23

Configuring your machine for a wireless network
If you are using your Windows Vista
steps.
NOTE
To use a Windows Vista
in advance. See the instruction manual that came with your WLAN access point/router.
1
(Windows Vista
Click , Network, and then Add a wireless device.
®
(Windows 7)
Click , Control Panel, Network and Internet, and then
Add a wireless device to the network.
2
Choose your machine and click Next.
3
Input the PIN from the printed page and then click Next.
4
Choose your network that you want to connect to, and then click Next.
5
Click Close.
g
A connection result message appears for 60 seconds on the LCD and a wireless LAN report will
automatically be printed. If the connection failed, check the error code on the printed report.
See Quick Setup Guide: Troubleshooting
®
(Windows )
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please double-click Start Here OSX in the
CD-ROM.
®
or Windows
® ®
or Windows 7 computer as a Registrar, you need to register it to your network
®
)
®
7 computer as a Registrar, complete the following
3
17