Configuration Using The Pin Method Of Wps (Wi-Fi Protected Setup) - Brother MFC-J4410DW Network User's Manual

Configuring your machine for a wireless network
e
When the LCD shows Start WPS or AOSS, press the WPS or AOSS™ button on your wireless
access point/router. See the User's Guide for your wireless access point/router for instructions.
Then press OK and your machine will now automatically detect which mode (WPS or AOSS™) your
wireless access point/router uses and try to connect to your wireless network.
f
A connection result message appears for 60 seconds on the LCD and a wireless LAN report will
automatically be printed. If the connection failed, check the error code on the printed report.
See Quick Setup Guide: Troubleshooting
®
(Windows )
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please double-click Start Here OSX in the
CD-ROM.

Configuration using the PIN Method of WPS (Wi-Fi Protected Setup)

If your WLAN access point/router (A) supports WPS, you can also configure using the PIN Method of WPS.
The PIN (Personal Identification Number) Method is one of the connection methods developed by the Wi-Fi
®
Alliance . By inputting a PIN which is created by an Enrollee (your machine) to the Registrar (a device that
manages the wireless LAN), you can setup the wireless network and security settings. See the User's Guide
for your WLAN access point/router for instructions on how to access the WPS mode.
 Connection when the WLAN access point/router (A) doubles as a Registrar.
3
3
15