How To Disable/Enable Airprint Using Web Based Management (Web Browser) - Brother MFC-J4310DW Manual

Troubleshooting
How to Disable/Enable AirPrint using Web Based
Management (web browser)
A standard web browser can be used to enable and disable the machine's AirPrint feature (it is enabled by
default).
a
Confirm that the machine is connected to the same network as the computer.
b
Open the web browser on your computer.
c
Type "vmachine's IP address/" into your browser's address bar (where "machine's IP address" is
your machine's IP address).
For example:

x192.168.1.2/
NOTE
• You can see your machine's IP address on the control panel's network menu. For more details, please
refer to your machine's Network User's Guide.
• If you have set the login password for the Web Based Management, enter the password in the Login box,
then click .
d
Depending on your machine, one of the following screens is displayed.
Do one of the following:
If screen (A) is displayed

1 Click Network.
2 Click Protocol.
3 Deselect AirPrint if you want to disable AirPrint; select AirPrint if you want to enable AirPrint.
4 Click Submit.
(A)
A
(B)
A
A
A
8