Install The Ink Cartridges - Brother MFC-J4310DW Quick Setup Manual

NOTE
If you are sharing one telephone line with an
external telephone, connect it as shown below.
Before you connect the external telephone,
remove the white protective cap c from the EXT.
jack of the machine.
a Extension telephone
b External telephone
c Protective cap
NOTE
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
Before you connect the external telephone
answering machine, remove the white protective
cap a from the EXT. jack of the machine.
a Protective cap
Set the receive mode to External TAD if you
have an external answering machine. See
Choose the correct Receive Mode on page 9. For
additional details, see Connecting an external
TAD (telephone answering device) in chapter 6 of
the Basic User's Guide.
1
2
3
1
4

Install the ink cartridges

CAUTION
If ink gets in your eyes, wash it out with water at
once and call a doctor if you are concerned.
NOTE
Make sure you install the Starter Ink Cartridges
included with your machine first.
a
Make sure that the power is turned on.
The Touchscreen will show
No Ink Cartridge.
NOTE
You can adjust the angle of the control panel by
lifting it. When lowering the control panel, make
sure you push the release button a that is
located behind the mark.
b
Open the ink cartridge cover a.
1
1
5