Canon MultiPASS F60 Setup Sheet page 8

• Windows 98/Me/2000 users: Once connected, the USB driver will automatically be
installed.
• Windows XP users: Once connected, the "Found New Hardware Wizard" dialog box
appears. Click [Install the software automatically], then click [Next].
7
Follow the on-screen instructions to complete installation.
8
When installation is complete, restart your computer before using the MultiPASS
Suite software.
Once installed, the MultiPASS Toolbar will be displayed on the desktop:
For details on using the MultiPASS Toolbar, see p. 9-1 of the Basic Guide.
NOTE
• Remember to register your machine to ensure product support. The serial number is
located on the back of the machine.
Congratulations! You have now completed your machine
setup.
Where to from here...
Once you have completed all steps in this Set-Up Sheet, refer to the Basic Guide for
basic operation instructions of all functions of your machine.
If after reading the Basic Guide you require more detailed information, refer to the
Comprehensive Guide or Software Guide (included in the CD-ROM).
If you wish to install any other software included in
the CD-ROM, click [Install Easy-PhotoPrint] or [Install
ScanSoft Omnipage SE].
Part no. HT3-2121-000-V.2.0
© 2002 Canon Inc.
Canon, MultiPASS, and BCI are trademarks of Canon Inc.
All other products and brand names are registered
trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
PRINTED IN THAILAND