Ending After The Projection - Epson EMP 71 Instruction Manual

Ending After the Projection

Ending
Projector
Operation display indicator
lights orange.
1.
2.
Remote control
3.
Press the Power button. A "Power Off"
confirmation message is displayed.
Press the Power button again.
The projector lamp goes out, the operation
display indicator flashes orange, and after
cool-down* is complete, the indicator
switches to steady orange.
Tip:
If you do not wish to shut the power, press
another button.
Or, if no action is taken, the message disappears
after 7 seconds.
Check that the operation display indicator
lights orange.
Tip:
• The flashing orange operation display
indicator indicates that cool-down (which takes
about 2 minutes) is in progress.
Buttons cannot be operated during cool-down.
• If the power cord plug is pulled out of the
outlet, the operation display indicator will go
out.
31