Possible Failures - Epson EMP 71 Instruction Manual

Possible Failures

If you think your projector may have failed, first check the indicators on the
unit.
Your projector includes an "operation display indicator" and a "problem/alarm
display indicator" which provide information on projector status.
Operation Display Indicator
Indicator
Cause
Status
Steady Standby
orange status
Flashing Cool-down
orange in progress
Steady Projection
green in progress
Flashing Warm-up in
green progress
Not lit No power
54
Problem/Alarm Display Indicator
Operation Display Indicator
Remedy or Status
(Not abnormal)
Press the Power button to begin projection.
(Not abnormal)
Please wait.
Cool-down* time takes about 2 minutes.
You cannot operate the Power button during cool-
down. Press the button again after cool-down ends.
(Not abnormal)
(Not abnormal)
Please wait.
Warm-up time is approximately 30 seconds.
After warm-up is complete, the flashing green
indicator changes to steady green.
If the lamp has been replaced, check that the lamp
and lamp cover are attached securely.
Check the power cord connections.
Check power at the outlet.
See
Page
24
31
25
25
66
24
24