Remote Control - Epson EMP 71 Instruction Manual

Remote Control

Operating Range
The remote control may not operate beyond certain distances and angles from
the receiver on the projector. Observe the following conditions during use.
[Operating Distance : Approximately 393.70inches (10m) ]
[Operating Area:]
Horizontally
Vertically
Tip:
• The remote control R/C switch must be switched to "On" to use the remote control.
• Point the remote control towards the remote control receiver on the projector unit.
• Certain screens may shorten the operating distance (approximately 393.70inches
(10m) ) of the remote control when the control is pointed towards the screen to reflect
its signal during use.
• Situate the remote control receiver out of direct sunlight, fluorescent light, and
similar light sources.
These may cause the remote control to malfunction.
• If the remote control malfunctions or stops operating, the batteries may need
changing.
Replace the batteries with a fresh set.
Remote control receiver
Approximately 30º Approximately 30º
Approximately 15º
Remote control
transmitter
11