Video Menu - Epson EMP 71 Instruction Manual

Video Menu

Displaying Menus
Press the Menu button, use the Enter button to select "Video" from the top
menu displayed, and press the Enter button to move to a submenu.
Tip:
• When there is no video signal from a Computer / Component Video device, the
"Video" menu is not available for settings.
• When there is no video signal from a Video device, only the "Mode" menu is available
for settings.
Settings
Video menu elements to be set differ as follows when projecting computer/
component video versus video images.
Computer/Component Video Projection
Menu
Position
Tracking*
Sync.*
D-Sub15: Computer/Component video Video: Video image
Content
Adjust video position vertically and
horizontally.
* After position is adjusted, changes in the
video signal from a computer (such as
changes in output mode or display color)
may change the adjusted value.
Adjust when broad vertical streaks appear
in image.
(Available for setting only when input
signal is RGB).
Adjust when flickering or blurring occurs
(available for setting only when input
signal is RGB).
* When tracking is wrong, adjustment of
sync will not correct flickering. Always
adjust tracking before adjusting sync.
Video Projection
D-Sub15
: setting available
Video Projection
Video
: setting not available
43