Connecting To Video Equipment; Projecting Video Images - Epson ELPLP29 User Manual

Connecting to Video Equipment

When connecting, be sure to:
c
• Turn off the power for both the projector and the video
equipment.
Damage may result if you try to make a connection when the
power is switched on.
• Check the connector types.
Damage may result if you attempt to insert a connector into the
incorrect port.

Projecting video images

f For Composite Video (DVD, VHS, Video games)
To video
(commercially available)
out port
AV cable (yellow)
To Video port
f For S-Video (DVD, S-VHS, Video games)
S-Video cable
(commercially available)
To S-Video out port
f For Component Video (DVD, Video games)
Component video cable
(optional)
From component
video out port
After projection starts, change the "Input Signal" setting in the
p
"Image" menu to either "Component Video
"Component Video (YPbPr
video equipment. s P.35
To S-Video port
To Computer/
Component Video port
(YCbCr )" or
g
)" to match the signals from the
g
18