Replacing Consumables; Lamp Replacement Period - Epson ELP-600 User Manual

Replacing Consumables

This section describes how to replace the lamp and the air filter.

Lamp Replacement Period

It is time to replace the lamp when:
• The message "Lamp Replace" appears on the screen for 30 seconds
when projection starts.
A message will be displayed.
• The lamp indicator flashes orange or lights red.
• The projected image gets darker or starts to deteriorate.
Tip :
• In order to maintain the brightness and quality of the projected images, replace the
lamp as soon as possible after the warning message appears.
• The replacement warning message is set to appear after 1400 hours of lamp use in order
to maintain the brightness and quality of the projected images. If you continue to use the
lamp after this period, the possibility of the lamp breaking becomes greater. When the
lamp replacement message appears, replace the lamp with a new one as soon as
possible, even if it is still working.
• The warning message appears after 1400 hours of use, but the actual life of each
individual lamp will vary depending on the characteristics of the lamp and on the way
it has been used. Some lamps may stop operating before 1400 hours of use, so you
should always have a spare lamp ready in case.
• When the lamp replacement warning message appears, the user's logo will not appear
even if the start-up screen setting is ON.
• Contact your dealer for a spare lamp.
Lamp indicator flashes orange or lights red
93