List Of Esc/Vp21 Commands; Command List - Epson ELP-600 User Manual

List of ESC/VP21 Commands

Command List

When a power ON command is sent to the projector, the power for the projector
turns on. When the projector is in a command ready state, it returns the '3Ah' (:)
code. Furthermore, when command processing is complete, the projector also
returns a ":" code.
The ":" code status can be used to determine whether the projector is ready or
busy. If command processing terminates with an error, an error message is
output and then the ":" code is sent.
Power ON/OFF
Signal selection
A/V Mute ON/OFF
A/V Mute selection
Item
ON
OFF
Computer1 (Analog-RGB)
Computer1 (Digital-RGB)
Computer1 (RGB-Video)
Computer2/Component Video (Analog-RGB)
Computer2/Component Video (RGB-Video)
Computer2/Component Video (YCbCr)
Computer2/Component Video (YPbPr)
Video
S-Video
ON
OFF
Black
Blue
User's Logo
Command
PWR ON
PWR OFF
SOURCE 11
SOURCE 12
SOURCE 13
SOURCE 21
SOURCE 22
SOURCE 23
SOURCE 24
SOURCE 41
SOURCE 42
MUTE ON
MUTE OFF
MSEL 00
MSEL 01
MSEL 02
103