Table of Contents
Advertisement
Convenient
Features
Multiple
sequence
cooking
Your oven can be programmed for up to 4 automatic
cooking sequences, switching from one power level
setting to another automatically.
Sometimes cooking directions
tell you to start on
one power level and then change to a different power
level. Your oven can do this automatically.
•
Suppose
you want
to cook
roast
beef
for
5 minutes at 100% and then continue to cook
for 30 minutes at 50%.
More
or less time
adjustment
Should you discover that you like any of the Sensor
Modes, Auto Cook, Quick Settings or Defrost slightly
more done, press the power level pad once after
pressing your choice of pads or before pressing
START pad. The display will show MORE.
Should you discover that you like any of the Sensor
Modes,
Auto Cooks,
Quick Settings
or Defrost
slightly less done, press the power level pad twice
after pressing your choice of pads or before pressing
START pad. The display will show LESS.
Step
Press
Quick Start
1. Enter cooking time.
quick start is a short-cut method to set time for 1-6
minutes at power level 10.
Suppose
you want to heat a cup of soup for
two minutes.
2. Press power level pad
once for 100% power.
power
level
X
1
3. Enter second cooking
time.
4. Press power level pad
6 times for 50% power.
5. Press START pad.
@
@@
power
level
x 6
START ]
Step
Press
Press number 2 pad.
The oven will start immediately and will signal then
turn off automatically
when finished.
Add 30 Seconds
add 30 seconds
provides
a convenient
way to
extend cooking time by 30 seconds while the oven
timer is counting down. It will add 30 seconds to the
time shown each time the pad is pressed.
This pad may also be used as a quick start for
30 seconds of cooking. No need to press START,
the oven will start immediately.
Each setting
has a cooking
hint. If you wish to
check, press user pref whenever HELP is lighted
in the Interactive Display for these and other manual
operation hints.
Advertisement
Table of Contents
