Image Is Truncated (Large) Or Small; Image Colors Are Not Right - Epson Dreamio EH-TW3800 User Manual

Problem Solving
Is an extension cable being
used?
Have the "Sync. " and
"Tracking " settings been
adjusted correctly?
Only when projecting
computer images
Has the correct resolution been
selected?
Only when projecting
computer images
■

Image is truncated (large) or small

Has the correct aspect
selected?
Has the "Position" setting been
adjusted correctly?
Has the computer been set for
dual display?
Only when projecting
computer images
Has the correct resolution been
selected?
Only when projecting
computer images
■

Image colors are not right

Are the image signal format
settings correct?
Are the cables connected
correctly?
Has the image contrast
been adjusted correctly?
Has color been adjusted
appropriately?
44
If an extension cable is used, interference may increase. Try
connecting a signal amplifier.
The projector has an automatic adjustment function that causes the
optimum images to be projected. However, for some types of
signal, the correct adjustments may not be obtained even after
automatic adjustment is carried out. In such cases, use the
"Tracking" and "Sync." menu commands to make the adjustments.
"Signal" - "Tracking", "Sync." p.33
Set the computer so that the signals that are output are compatible
with this projector.
"List of Supported Monitor Displays" p.53
Computer documentation
Press
been
signal. p.18
If images with subtitles are being projected using "Zoom", use the
"Zoom Caption Pos." menu command to adjust the images.
p.33
Use the "Position" the menu command to make the adjustment.
"Signal" - "Position" p.34
If the dual display setting has been activated by the connected
computer, only half of the images on the computer screen is
displayed by the projector. To display the whole of the image on the
computer screen, turn off the dual display setting.
Computer video driver documentation
Set the computer so that the signals that are output are compatible
with this projector.
"List of Supported Monitor Displays" p.53
Computer documentation
If a composite video or S-Video
If projection does not occur when the "Video Signal" menu
command is set to "Auto", select the signal format that matches the
signal source.
"Settings" - "Input Signal" - "Video Signal" p.37
If the signal source is connected to the [Component] input port
If projection does not occur when the "Component" in the "Input
Signal" menu command is set to "Auto", set the signal format that
matches the signal that is being projected from the connected
equipment.
Check that all of the cables required for projection are securely
connected. p.12
Use the "Contrast" menu command to adjust the color.
"Image" - "Contrast" p.32
Use the "Advanced" menu command to adjust the color.
"Image" - "Advanced" p.32
to select the aspect that corresponds to the input
is being input
"Settings" - "Input Signal" - "Component" p.37