Preparing The Remote Control; Inserting Batteries Into The Remote Control; Using The Remote Control - Epson Dreamio EH-TW3800 User Manual

Preparing the Remote Control

Inserting batteries into the remote control

Check the (+) and (-) indications inside
the battery compartment and insert the
batteries so that they face correctly.
If delays in the responsiveness of the remote control occur or if it does not operate
after it has been used for some time, it probably means that the batteries are
becoming flat. If this happen, replace the batteries with two new batteries. Use two
TIP
new AA-size alkali batteries or manganese batteries as replacement batteries.
Batteries other than AA-size alkali batteries or manganese batteries cannot be used.

Using the remote control

Operating range (horizontal)
Operating range (vertical)
Approx.10 *
* Remote control signals
cannot be received within this
range.
At the time of purchase, the batteries are not
inserted into the remote control. Insert the supplied
batteries before using the remote control.
Approx.30
Approx.30
Approx.10m
Operating distance
Approx.60
Approx.10m
Operating distance
Lift up the battery cover while pressing its
tab.
Insert the batteries in the correct direction.
Close the cover.
Approx.30
Approx.30
Approx.10m
Operating distance
Approx.30
Approx.30
Approx.10m
Operating distance
13