Part Names And Functions; Front/Top - Epson EB 824 User Manual

Part Names and Functions

Front/Top

Name
A
Exhaust vent for air used to cool the projector internally.
Air exhaust vent
B
Remote Receiver
Receives signals from the remote control. s Quick
Start Guide
Function
Caution
Do not place objects that may become warped or
otherwise affected by heat near the Air exhaust
vent and do not put your face or hands near the
vent while projection is in progress.
Name
C
Slide the knob to open and close the A/V mute slide knob.
A/V mute slide knob
D
Pull out the Foot adjust lever to extend and retract the
Foot adjust lever
Front adjustable foot. s Quick Start Guide
E
Front adjustable foot Extend and adjust the position of the projected image
when the projector is placed on a surface such as a desk.
s Quick Start Guide
F
Slide shut when not using the projector to protect the
A/V mute slide knob
lens. By closing during projection you can hide the
image and the sound (A/V Mute). s Quick Start
Guide , s
G
Air intake vent Takes in air to cool the projector internally. If dust
(Air filter) collects here it can cause the internal temperature to
rise, and this can lead to problems with operation and
shorten the optical engine's service life. Be sure to clean
the Air filter regularly. s p.67,
H
Air filter cover open/
Opens and closes the air filter cover. s
close switch
Open this cover when installing the optional Wireless
LAN unit.
I
Security cable Pass a commercially available wire lock through here
installation point
and lock it in place. s
J
The Security slot is compatible with the Microsaver
Security slot
Security System manufactured by Kensington.
p.32
s
K
Focus ring
Adjusts the image focus. s Quick Start Guide
L
Zoom ring
Adjusts the image size. s Quick Start Guide
M
Control panel
p.12
s
N
Lamp cover Open this cover when replacing the projector's Lamp.
p.69
s
Function
p.19
p.72
p.72
p.32
9