Security
The security menu items allow you to change the system security settings. Press
<enter> to display the configuration options:
q Change Supervisor/User Password
Select this item to set or change the supervisor/user password. The Supervisor/
User Password item on top of the screen shows the default setting: [Not Installed].
After you set a password, this item shows [Installed].
To set a Supervisor/User Password:
1. Select the item [Change Supervisor/User Password] and press <Enter>.
2. From the password box, type a password composed of at least six letters and/or
numbers, then press <Enter>.
3. Confirm the password when prompted:
The message "Password Installed" appears after you successfully set your
password.
To change the supervisor/user password, follow the same steps as setting a use
password.
To clear the supervisor/user password, select the item [Change Supervisor/User
password], then press <enter>. The message "Password Uninstalled" appears.
q Boot Sector Virus Protection
The item allows you to enable or disable boot sector virus protection.
Boot Menu
The Boot menu items allow you to change the system boot options. Press <enter> to
display the configuration options:
Boot Settings Configuration
The items allow you to configure Boot settings. Press <enter> To display the
configuration options:
q Quick Boot
Enabling this item allows the BIOS to skip some power on self tests while booting
to decrease the time needed to boot the system. When set to [Disabled], BIOS
performs all the POST items.
q Fullscreen LOGO Show
Enable or disable fullscreen LOGO show.
Configuring the BIOS
23