Packing List; Low Battery; Capacity Indicator; Battery Protection - Craftsman nextec 320.61325 Operator's Manual

A
WARNING: If any part is broken or missing, do not attempt to attach the
battery or operate the saw until the broken or missing part is replaced. Failure to
do so could result in possibly serious injury.
_l_ WARNING: Do not attempt to modify this saw or create accessories not
recommended for use with this saw. Any such alteration or modification is misuse
and could result in a hazardous condition leading to possible serious injury.
_k WARNING: To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the saw when assembling parts.
UNPACKING
This product has been shipped completely assembled.
* Carefully remove the tool and any accessories from the box. Make sure that
all items listed in the packing list are included.
* Inspect the tool carefully to make sure no breakage or damage occurred
during shipping.
* Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
* If any parts are damaged or missing, please refer to the numbers listed on
the back page of this operator's manual.
PACKING LIST
Circular saw, blade (installed on the saw), hex wrench, vacuum adapter, screw,
operator's manual
LOW-BATTERY CAPACITY INDICATOR
If the FuelGauge shines red when the trigger switch on the saw is depressed, the
battery pack power has run out, and the battery pack should be recharged.
Unlike other battery-pack types, Lithium-Ion battery packs deliver fade-free
power for their entire run time. The tool will not experience a slow, gradual loss
of power as you work. To signal that the battery pack is at the end of its run time
and needs to be charged, the power to the tool will drop quickly.
NOTE: The LED may also flash due to an overload or high temperature (see
BATTERY PROTECTION).
61325 Manual_Revised_lO 0225 Page 14