Craftsman 130.27719 Owner's Manual page 5

Always wear safety goggles or eye
protection when using this tool. Use a
dust mask or respirator for applications
which generate dust.
Secure material before cutting. Never
hold it in your hand or across legs. Small
or thin material may flex or vibrate with the
blade, causing loss of control
Make certain all adjusting screws and the
blade holder are Ught before making a
out. Loose adjusting screws and holdem
can cause the tool or blede to sTIpand loss
of control may result.
When removing the blade from the tool
avoid contact with skin and use proper
protective gloves when grasping the
blade or accessory. Accessories may be
hot after prolonged use,
If your tool is equipped with a dust bag,
empty it frequently and after completion of
sawing. Spontaneous combestion, may in
time, result from mi._J m of oil or water with
dust parficles. Be exftemely careful of dust
disposal, materials in fine partJc+eform may be
explosive. Do not throw contents on an open
fire.
_Some dust created by
power sanding, sawing,
grinding, drilling, and other construction
activities contains chemicals known to
Cause cancer, birth defects or other
reproductive harm, Some examples of
these chemicals are:
• Lead from lead-based paints,
- Crystalline silica from bricks and cement
and other masonry products, and
,, Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures vades,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a wetl ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles,