Product Specifications; Features - Craftsman 320.2767 Operator's Manual

_, WARNING: Do not allow familiarity with the router to cause a lack of
alertness. A fraction of a second of carelessness is enough to cause severe injury
PRODUCT SPECIFICATIONS
Rating 9.5 Amps
No Load Speed 25000 RPM
Peak HP 1-3/4
Collets/Nuts and Cutter bit Shank Diameters 1/4 in.
Fixed Base Diameter 6 inches
Sub Base Opening (Diameter for cutter bit use) 1-1/4 inches
Sub Base Thickness 1/4 inch (6mm)
Fixed Base Depth of Cut 1-3/4 inches (45mm)
WARNING: The safe use of this product requires an understanding of the
information on the tool and in this operator's manual, as well as knowledge of the
project you are attempting. Before use of this product, familiarize yourself with all
operating features and safety rules.
This Fixed Base Router has the following features:
1. Powerful, 9.5 Amp Soft Start Motor develops 1-3/4 Peak HP to handle
most routing jobs.
2. Single-speed 25000 RPM (no-load speed) helps provide a quality finish in
most materials.
3. Fixed Base features Coarse and Fine Depth Adjustments for accurate set-
ups. Ideal for use with a router table, sold separately.
4. Spindle Lock for easy 1-wrench bit changes. Includes 1/4-in. self-releasing
collet/nut for use with a wide variety of 1/4-in. router bits, sold separately.
5. 100% Ball Bearings for smooth, efficient operation and long life.
6. Base features Ergonomically Designed Handles for comfort and maximum
control.
7.
.
9.
Durable Non-marring Sub-base glides smoothly over workpiece.the
sub-base has a cutter-bit opening of 1-1/4 inches. Do not use a bit with a
cutter diameter larger than 1-1/4 in. as it will not pass through the sub-base
opening.
Base constructed of Die-Cast Aluminum to provide durability and stability.
Motor housing constructed of High Density Nylon and Precision Milled
Cast Aluminum for strength and exact fit into base.
10. High-impact resistant Motor Housing Top Cap and Handles on Base help
2767 Manual_Revised_lO 1213 Page 13