Unpacking; Carton Contents/Loose Parts - Craftsman 320.2767 Operator's Manual

a WARNING: Your router should never be connected to the power source
when you are assembling parts, making adjustments, installing or removing bits,
cleaning, or when it is not in use Disconnecting the router will prevent accidental
starting, which could cause serious personal injury
When unpacking the box, do not discard any packing materials until all of the
contents are accounted for
1.
2
Carefully lift the router out of the carton and place it on a stable, flat surface.
Open the carton to locate the following:
• Vac adapter and 2 screws used to attach it to the base
• Chip shield ( already installed on router)
• 1/4-in collet/nut (already installed on router)
• Collet/nut wrench
• Manual
3 Inspect the items carefully to make sure that no breakage or damage has
occurred during shipping If any of the items mentioned is missing, (refer to
"PARTS LIST" illustration), return the router to your nearest Sears store to have
the router replaced
a WARNING: If any part is broken or missing, do not attempt to assemble the
router, plug in the power cord, or operate the router until the broken or missing
part is replaced Failure to do so could result in possible serious injury
CARTON CONTENTS/LOOSE PARTS
Fixed Base Router
Vac adapter
Chip shield (already installed on router)
_' 2 screws (for attaching Vac adapter)
1/4-in. Collet/Nut (already installed on
router)
Collet/Nut Wrench
2767 ManuaLRevised_lO 1213 Page 11