Chip Shield; Dust Collection With Vac Adapter - Craftsman 320.2767 Operator's Manual

CHIP SHIELD (Fig. 16 )
_I, WARNING: Always wear eye
protection. The chip shield is not
intended as a safety guard.
To remove the chip shield from the
fixed base, press inward on the tabs
until the chip shield releases from
base and then remove the chip shield.
To attach, place the chip shield back
in position and flex the sides while
pushing in the shield until it snaps
back into place (See Fig. 16).
A_, WARNING: The chip shield helps
to keep dust and chips away from the
operator; it will not stop objects larger
than woodchips that are thrown from
the bit.
CAUTION: Always have the chip
Fig. 16
S ! ili!iii i ii ii i!iiiii!iii i i!i i!i ! J
Fig. 17
2 screws includ_
shield in place on the base when operating the router.
A_, WARNING: Always turn the motor off and unplug the router from the power
source before making any adjustments or installing accessories. Failure to turn
the motor off and unplug router could result in accidental starting which can
cause serious personal injury.
DUST COLLECTION WITH VAC ADAPTER (Fig.17)
The vac adapter is sized to accept a 1-1/4-in. vac hose adaptor, sold
separately.
To attach the vac adapter onto the fixed base, position and secure it to the back
of the base with the two screws (included) as shown in Fig. 17.
2767 ManuaLRevised_lO 1213 Page 28