Product Specifications; Unpacking; Accessories - Craftsman 315.175070 Owner's Manual

AWARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to filter out microscopic particles.
SAVETHESEINSTRUCTIONS
Plunge Depth 0-2 in.
Maximum Cutter Diameter 2-3/8 in.
Collet 1/4 in.
Horsepower 1-3/4
Rating 120 volts, 60 Hz AC only, 9.0 amperes
No Load Speed 15,000 - 25,000 RPM
Power Cord 10 ft.
Net Weight 8.1 Ib,
Your plunge router has been shipped completely
assembled and ready for use. Inspect it carefully to
make sure no breakage or damage has occurred
during shipping. If any parts are damaged
or missing, contact your nearest Sears Retail Store
to obtain replacement parts before attempting to
operate router.
The only loose parts included in the box are a 9/16 in.
wrench and owner's manual.
_1, WARNING: If any parts are missing, do not
operate this tool until the missing parts are
replaced. Failure to do so could result in possible
serious personal injury.
"-" THE FOLLOWING ACCESSORIES ARE CURRENTLY AVAILABLE AT SEARS RETAIL STORES
Dovetail Template Multi-Purpose Router Guide
Box Joint Template Rout -A - Form Pantograph
Butt Hinge Template Sharpening Kit
COMBI- VEINING COREBOX
NATION BIT BIT
PANEL
CUTrER
! ,
l V-GROOVE
CHAMFER
!
STRAIGHT
FACE
BIT
[
L!
COMB-
INATION
STRAIGHT
BEVEL
CUTTER
f I
HINGE
_IORTISING
BIT
DOVETAILRABBET OGEE, COVE
CUTTER BIT :IOMANO BIT,
BITS 45°
CHAMFER
BIT
J *CARBIDETIPPEDBITS I
*25895FOR CARBIDETIPPEDEDGEFORMINGBITS
2589 FOR HIGHSPEEDSTEELEDGEFORMINGBITS
A WARNING: The use of attachments or accessories not listed above might be hazardous.
5
BEAD ARBOR
QUARTER- 2598
ROUND !
BITS
¢
wrrH2
BALL
3EARING$
(1/2 IN.&
HUN,)
I