Resetting The Lamp Timer - Epson PowerLite 5600p User Manual

caution
Do not touch the glass
portion of the lamp assembly.
Touching the glass could
result in premature lamp
failure.
Maintaining and Transporting the Projector
62
6. Insert the new lamp as shown.
7. Make sure the lamp is fully seated, then tighten its screws.
8. Replace the lamp cover and tighten its screw securely. (The
projector won't come on if the lamp cover is loose.)
9. Reset the lamp timer as described in the following section.

Resetting the Lamp Timer

After installing a new lamp, you need to reset the timer so the
projector can keep track of how many hours it has been used. Follow
these steps:
1. Plug in the projector and turn it on (see page 22).
2. After the projection lamp comes on, press the
hold it down for at least 5 seconds.
You see the Help menu, and then the following message:
:Select
Reset Lamp ON Time
Do you reset the Lamp ON Time?
Yes No
:Execute
button and
Help