Connecting To A Dvi Video Source - Epson PowerLite 5600p User Manual

Connecting to Additional Equipment
88

Connecting to a DVI Video Source

The projector's Digital Visual Interface (DVI) receives pictures
directly from your computer in digital format. This lets the projector
display images of greater clarity than can be achieved using a standard
analog VGA connection.
To project images in digital video format, follow these steps:
1. Connect the computer's DVI cable to the projector's DVI port.
slide switch to right
Computer 2 /
Component Video
S-Video
Video L-Audio2-R
Remote
Control (RS-232C)
2. Using the tip of a pen or a small screwdriver, slide the
interface switch to the right to select
Computer 1
need to use the projector's VGA port again, be sure to slide the
switch back to the left.)
If you want to connect audio for this computer, use the projector's
port; if you want to connect a mouse cable (to use the remote
Audio 1
control as a wireless mouse), use the
Computer 1
DVI port
Analog Digital
Audio 1 Audio Out
Mouse
port.
Mouse
. (If you
Digital