Visual Setup Menu - Epson DREAMIO EH-DM3 User Manual

Visual Setup menu

Image page
When the color mode is set to "Auto", you cannot make the setting. sp. 25
Brightness
Contrast
Color Saturation
Tint
Sharpness
Color Temp.
Auto Iris
Signal page
Keystone
Auto Keystone
Zoom
Power Consumption
When the color mode is set to "Auto", you
cannot make the setting. sp. 25
Resolution
Video Signal
Sets the signal format of the video equipment
connected to the Video input port.
Ceiling Projection
58
Setting Item
Setting Item
Setting Contents
Adjusts the image brightness.
Adjusts the difference between light and shade in the images.
Adjusts the color saturation for the images. (This is not displayed
when a computer is connected.)
Adjusts the image tint. (This is not displayed when the external
video or computer connected is not NTSC.)
Adjusts the image sharpness.
Adjusts the entire image tint.
High: Makes the image bluish.
Low: Makes the image reddish.
Adjusts the light intensity according to the brightness of the
displayed image.
On: Activates Auto Iris.
Off: Deactivates Auto Iris.
Setting Contents
You can correct keystone distortion in the vertical directions.
sp. 21
On: Performs Auto Keystone.
Off: Deactivates Auto Keystone.
Adjusts the image size.
Wide: Enlarges the image.
Tele: Reduces the image.
You can set the Lamp brightness to "ECO" or "Normal".
Select "ECO" if the images being projected are too bright such as
when projecting images in a dark room or onto a small screen.
When "ECO" is selected, the amount of electricity consumed and
the lamp's operation life are changes as follows, and fan rotation
noise during projection is reduced. Electrical consumption: about
16% decrease, lamp life: about 1.2 times longer
When set to "Auto", the resolution of the input signal is
automatically identified. If the images cannot be projected correctly
when set to "Auto", such as when some of the image is missing,
adjust to "Wide" depending on the connected computer for wide
screens, or set to "Normal" for "4:3" or "5:4" screens.
Only displayed when "Video" is selected as the source.
At the time of purchase, this is set to "Auto" so the video signal is
recognized automatically. If interference appears in the projected
images or no images appear when you select "Auto", select the
appropriate signal manually.
On: Projects images onto the ceiling using the optional Ceiling
Reflector Kit.
Off: Deactivates the ceiling projection.