Stopping Playback; Turning Off The Power - Epson DREAMIO EH-DM3 User Manual

Stopping playback

Press .
stopping, when you press
resumed from the interrupted scene (resume).
Notes on resume play
• If you press
on the screen, "Resume Play" is displayed and
the disc is played from the last stop position.
• Remember that the resume play function is
canceled if you press
• You cannot resume playing a disc indicated as
formatted
• You can resume playing up to 10 discs that you
have recently played even if you replace the
discs.
• The position from where playback resumes may
be slightly different to where playback was
stopped.
• The audio language, subtitle language, and angle
settings are memorized along with the stopping
position.
• If you stop play when the disc menu is displayed,
the resume play may fail.
22
After
, playback is
when "Loading" is displayed
twice.
on the File List and on VR
.

Turning off the power

A
When you have played back a disc,
press to eject the disc from its slot.
• Once you have pressed
back the ejected disc again, you cannot push it
back into the disc slot manually. Press
B
Press .
You can use the
the same effect as the effect of the
remote control.
C
Unplug the power cable from the
electrical outlet after the confirmation
buzzer beeps twice.
If you only press
electricity continues to be consumed.
D
Close the lens cover.
Keep the lens cover in place when the unit is not
being used to protect the lens from dirt and
damage.
• If you turn on the projector immediately after
turning it off, the load time to project images
becomes longer.
Disconnecting the power cable before the projector
beeps may damage the optical components.
, if you want to play
.
on the main unit to achieve
on the
to turn off the power,