Carton Contents; Unpacking - Craftsman 137.212360 Operator's Manual

UNPACKING YOUR MITER SAW
IA WARNING I
To avoid injury from unexpected starting or
electrical shock, do not plug the power cord
into a source of power during unpacking and
assembly. This cord must remain unplugged
whenever you are working on the saw.
1. Remove the miter saw from the carton.
iMPORTANT: Do not lift miter saw by
the trigger switch handle. It may cause
misalignment. Lift machine by the built-in
carry handle.
2. Place the saw on a secure stationarywork
surface.
3. Separate all parts from the packingmaterial.
Check each of the illustrationsshown below
to make certain all items are accounted for,
before discardingany packing material
I,A WARNING I
If any part is missing or damaged, do not
attempt to assemble the miter saw, or plug In
the power cord untll the mlssing or damaged
part Is correctly replaced. To avoid electric
shock, usa only Identical replacement parts
when servicing double insulated tools. Call
1-800-4-_AY-HOM_ for replacement parts.
Miter Saw
Hold-Down Clamp
Dust Bag
Batteries
.._J
Hex Key
Miter Table Handle
Blade Wrench
Rear Extension Stay
II III 9 IJ IIIII