Craftsman 33731 Operator's Manual page 4

Installing the Right Bracket
4. Align h oles i nrod assembly [C] w ith holes i npanel and secure
with the following items f rom the hardware pack, Figure 5:
Two 1/4-20 x1.75" screws [F]
Four flat w ashers [H]
Two 1/4-20 cap lock nuts [G]
t \
Figure5
J
INSTALLING THE LEFT SIDE BRACKET
Remove the Left Side Hardware
5. Removethe followingfrom the left sideof the upper handle,
Figure6. The hardwareremovedcan be discarded.
* Two 1/4-20screws
, Two flat washers
, Two 1/4-20cap lock nuts
Figure6
Installing the Left Bracket
6. Align holesin rod bracket[E] with holesin panel whileplacingend
of rod assembly[C] throughthe bracket.Securewith the following
itemsfromthe hardwarepack,Figure7:
Two 1/4-20x 1.75"screws[F]
Fourflat washers[H]
Two 1/4-20cap lock nuts [G]
TIGHTENING THE HANDLE KNOBS
7. Tightenthefour star knobs loosenedin step 2.
f
4
/ .............
Figure7
\
G