Fiery EX2101 Printing Manual page 124

A
A-16 Print Options
5. Select the Define each chapter as a separate finishing set check box if you want each
chapter to be treated as a separate finishing set.
For example, selecting this check box instructs the Fiery EX2101 to staple each
chapter separately.
6. For each page range, enter the page numbers and specify the options for that range.
You can choose your specifications from the following options:
—Enter a page number or the range of page numbers. Use a hyphen to
Page Range
define a range of sequential pages. For example, 1-3 prints the first three pages on a
particular media type. The range -14 prints the first 14 pages; 5- prints Page 5 through
the end of the document. If all the pages in multiple ranges use the same media type,
you can combine ranges with a comma; for example, 4-5, 9-10.
You can insert a blank sheet by entering ^. For example, entering ^6 into the Page
Range option inserts a blank sheet before page 6.
You cannot combine a single page with page ranges.
N :
OTE
—Select Top-Top to print duplex so that the top of the image on Side 1 is on
Duplex
the same edge of the page as the top of the image on Side 2, or Top-Bottom to print
duplex so that the top of the image on Side 1 is on the opposite edge of the page from
the top of the image on Side 2. Duplex must first be selected in the printer driver
before you can specify duplex printing with mixed media. The first page of duplex
pages is always printed on the front of the sheet.
—Select a color of media you want to use for the range.
Media Color
—Select a type of media you want to use for the range.
Media Type
Paper Source
Document Default represents the setting you make outside the Mixed Media
N :
OTE
dialog box. For example, if you set Paper Source to Tray 1 under the Paper Source print
option bar, Document Default for Paper Source in the Mixed Media dialog box is
equal to Tray 1.
If options are not specified for page(s) that fall between specified pages or
N :
OTE
page ranges in the Selection List, those page(s) are printed with the Body
specifications. The Body specifications are the print option settings for all
documents currently selected for the printer driver.
Make sure to load the correct media types into the correct drawers as defined in
N :
OTE
the Mixed Media dialog box, as well as under the Paper Source print option bar.
—Select a paper tray with a media you want to use for the range.