Fiery EX2101 Printing Manual page 113

A
A-5 Print Options
Option and settings
(default setting is underlined)
Creep Adjustment
Off/Normal/Thick
Duplex
Off/Top-Top/Top-Bottom
Face-Down Printing
Off/On
Fit to Print
Off/On
Folding
Off/Z-Fold/Tri-Z/Half-Fold/Tri-C
Group Name
Group Password
Image Shift
None/Left/Right/Top/Bottom
Description
Use this option to adjust images that may
shift from the center of the sheet in
booklet print jobs.
Specify whether the job should print
single-sided or double-sided (duplex),
by specifying the orientation of
printed images.
Select Off to print your document on the
top of the paper. Select On to print your
document on the bottom of the paper
(that is, the document will output from
the copier with the text facing down).
Specify if you want your job to fit to the
print size specified.
Specify how you want your job to
be folded.
If Printing Groups is enabled, the
Fiery EX2101 administrator has assigned
users to print groups, and passwords to
each group. Enter the appropriate Group
Name for the print job.
If Printing Groups is enabled, the
Fiery EX2101 administrator has assigned
users to print groups, and passwords to
each group. Enter the appropriate Group
Password for the print job.
Select the direction to which you need
the image to be shifted. The magnitude
of the image shift can be specified in the
MWidth print option.
Requirements, constraints,
and information
Creep can occur when booklet jobs have
a large number of pages or when booklet
jobs are printed on thick media. For more
information, see page A-13.
This option is not available in the PCL
printer driver.
For more information on duplex
printing, see page A-13.
The Media Type option must be
Plain Paper or Heavy Paper if Face-Down
Printing is set to On.
This option is only available from
Command WorkStation.
This option is not available in the PCL
printer driver.
This option is not available in the PCL
printer driver.