Gigabyte GA-MA790X-UD3P User Manual page 84

7. Save and Exit Setup: After configuring the RAID array, select the Save And Exit Setup item in the
main screen to save your settings before exiting the RAID BIOS utility, then press <Y> (Figure 10).
GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS v1.06.78
[ Main Menu ]
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save And Exit Setup
Exit Without Saving
[ RAID Disk Drive List ]
Model Name
RDD0: GRAID
[TAB]-Switch Window
Now, you may proceed to create the SATA RAID/AHCI driver diskette and the installation of the SATA
RAID/AHCI driver and operating system.
Delete the RAID Array:
To delete the array, select Delete RAID Disk Drive in the main menu and press <Enter>. The selection
bar will move to the RAID Disk Drive List block. Press the space bar on the array to be deleted; a
small triangle will appear to mark the selected array. Press <Delete>. When prompted to confirm your
selection (Figure 11), press <Y> to confirm or <N> to cancel.
GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS v1.06.78
[ Main Menu ]
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save And Exit Setup
Exit Without Saving
[ RAID Disk Drive List ]
Model Name
 RDD0: GRAID
[]-Select RAID
GA-MA790X-UD3P Motherboard
[ Hard Disk Drive List ]
Model Name
HDD0: ST3120026AS
HDD1: ST3120026AS
Save to Disk & Exit (Y/N)?Y
RAID Level
0-Stripe
[]-Select ITEM
Figure 10
[ Hard Disk Drive List ]
Model Name
HDD0: ST3120026AS
HDD1: ST3120026AS
ALL DATA ON THE RAID WILL LOST!!
ARE YOU SURE TO DELETE (Y/N)? N
RAID Level
0-Stripe
[SPACE]-Mark Delete
Figure 11
- 84 -
Capacity Type/Status
120 GB
120 GB
Capacity Status
240 GB Normal
[ENTER]-Action
Capacity
120 GB
120 GB
Capacity Status
240 GB Normal
[DEL]-Confirm [ESC]-Abort
RAID Inside
RAID Inside
Members(HDDx)
01
[ESC]-Exit
Type/Status
RAID Inside
RAID Inside
Members(HDDx)
01