Gigabyte GA-MA790X-UD3P User Manual page 83

When finished, the new RAID array will be displayed in the RAID Disk Drive List block (Figure 8).
GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS v1.06.59
[ Main Menu ]
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save And Exit Setup
Exit Without Saving
[ RAID Disk Drive List ]
Model Name
RDD0: GRAID
[TAB]-Switch Window
To check more detailed information about the array, use the <Tab> key while in the Main Menu block
to move the selection bar to the RAID Disk Drive List block. Select the array and press <Enter>.
A small window displaying the array information will appear in the center of the screen (Figure 9).
GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS v1.06.59
[ Main Menu ]
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save And Exit Setup
Exit Without Saving
[ RAID Disk Drive List ]
Model Name
RDD0: GRAID
[TAB]-Switch Window
[ Hard Disk Drive List ]
Model Name
HDD0: ST3120026AS
HDD1: ST3120026AS
RAID Level
0-Stripe
[]-Select ITEM
Figure 8
[ Hard Disk Drive List ]
Model Name
HDD0: ST3120026AS
HDD1: ST3120026AS
[ RAID Information ]
Name: GRAID
Level: 0-Stripe
Block: 128KB
Capacity: 240GB
RAID Level
Members: HDD 01
0-Stripe
Status: Normal
[]-Select RAID
Figure 9
- 83 -
Capacity Type/Status
120 GB
120 GB
Capacity Status
240 GB Normal
[ENTER]-Action [ESC]-Exit
Capacity Type/Status
120 GB
120 GB
Capacity Status
240 GB Normal
[ENTER]-Detail [ESC]-Exit
RAID Inside
RAID Inside
Members(HDDx)
01
RAID Inside
RAID Inside
Members(HDDx)
01
Appendix