Gigabyte GA-MA790X-UD3P User Manual page 41

CAS# latency
Options are: Auto (default), 3T~7T.
RAS to CAS R/W Delay
Options are: Auto (default), 3T~6T.
Row Precharge Time
Options are: Auto (default), 3T~6T.
Minimum RAS Active Time
Options are: Auto (default), 5T~18T.
1T/2T Command Timing
Options are: 1T (default), 2T.
TwTr Command Delay
Options are: Auto (default), 1T~3T.
Trfc0 for DIMM1
Options are: 75ns, 105ns (default), 127.5ns, 195ns, 327.5ns.
Trfc2 for DIMM2
Options are: 75ns, 105ns, 127.5ns, 195ns, 327.5ns.
Trfc1 for DIMM3
Options are: 75ns, 105ns, 127.5ns, 195ns, 327.5ns.
Trfc3 for DIMM4
Options are: 75ns, 105ns, 127.5ns, 195ns, 327.5ns.
Write Recovery Time
Options are: Auto (default), 3T~6T.
Precharge Time
Options are: Auto (default), 2T, 3T.
Row Cycle Time
Options are: Auto (default), 11T~26T.
RAS to RAS Delay
Options are: Auto (default), 2T~5T.
******** System Voltage Optimized
System Voltage Control
Determines whether to manually set the system voltages. Auto lets BIOS automatically set the
system voltages as required. Manual allows all voltage control items below to be configurable.
(Default: Auto)
DDR2 Voltage Control
Allows you to set memory voltage.
Normal
+0.100V ~ +0.700V
********
Supplies the memory voltage as required. (Default)
Increases memory voltage by 0.100V to 0.700V at 0.100V increment.
- 41 - BIOS Setup