Unpacking And Checking Contents; Tools Needed; Unpacking; List Of Loose Parts - Sears Craftsman 113.235100 Owner's Manual

Unpacking and Checking Contents
Tools Needed
Tools required for alignment:
1 Combination Square
2. Combination wrench, 1/4" Hex "L" wrench with #2
phillips tip (supplied)
MBINATION S_UARE
1/2" SOCKET &
SOCKET WRENCH
HEX "L" W/PHILLIPS WRENCH (SUPPLIED)
COMBINATION SQUARE MUST BE TRUE
DRAW LIGHT STRAIGHT EDGE OF
LINE ON BOARD BOARD 3/4" THICK
ALONG THIS EDGE
_, ,m
THIS EDGE MUST BE
_,'°" '_ ///PERFECTLY STRAIGHT
SHOULD BE NO GAP OR OVERLAP
WHEN SQUARE IS FLIPPED
OVER IN DOTTED POSITION
Unpacking
WARNING: To avoid injury from unexpected
starting or electrical shock, do not plug the
power cord into a source of power during
unpacking and assembly. This cord must
remain unplugged whenever you are working
on the saw.
Model 113.235200 and !13.235100 Miter saws, are
each shipped complete in one box,
NOTE: This manual gwes instructions for both
113.235200 compound miter saw and 113.235100 non-
compound miter saw, The two saws are very similar in
design and function. Many parts are identical. The illus-
trations will reflect the compound miter saw when
describing most applications. Illustrations of the non-
compound miter saw will also be given to explain the
features that are unique to that saw,
WARNING: Although small, this saw is heavy,
to avoid back injury, get help whenever you
have to lift the saw more than 10 inches.
1. Remove the miter saw from the carton by I fting the
saw by the carry handle
WARNING: If any part is missing or damaged,
do not plug the saw in until the missing or
damaged part is correctly replaced. To avoid
electric shock, use only identical replacement
parts when servicing double insulated tools,
2. Place the saw on a secure stationary work surface
and look t_e saw over carefully
List of Loose Parts
A. Basic Saw Assembly ................................................. 1
B, Owners Manual Form ................................................ 1
C Dust Elbow ................................................................. 1
A
B
7