Sears Craftsman 113.235100 Owner's Manual page 23

Sears Recommends the Following Accessories
Recommended Accessories
WARNING: To avoid injury from unsafe acces-
sories, use only accessories shown
on
the rec-
ommended accessories list in this manual.
Prohibited Accessories
The use of any cutting tool except 10" saw blades
which meet the requirement under recommended
accessories is prohibited, Do not use accessories such
as shaper cutters or dado sets, Ferrous metal (metal
with iron in it) cutting and the use of abrasive wheels
are prohibited, See WARNING and CAUTION notes in
the "Safety Instructions For Basic Saw Operations"
Section, If planning to saw non-ferrous metal see those
WARNING and CAUTION notes in the "Safety
Instructions For Basic Saw Operations" Section.
Leg Sets .............................................................. 9-22244
............................................................................ 9-22246
Carbide-Tipped Blades:
Trim Saw ..................................................... See Catalog
Cut-Off ......................................................... See Catalog
Combination ................................................ See Catalog
Plywood/Particle Board .............................. See Catalog
Non-Carbide Tipped Blades:
Cross Cut/Plywood ..................................... See Catalog
Combination ................................................ See Catalog
Clamp ................................................................ 9-29000
Table Extensions ............................................... 9-29001
Crown Molding Jig ............................................. 9-29002
Dust Bag ............................................................ 9-23467
1-1/4" Sawdust Collector Hose ......................... 9-17866
Basic Blade Requirements
10" Diameter
Blades marked for 5,500 RPM or higher
5/8" Diameter Arbor Hole
23