Epson TM-U200 Operator's Manual page 29

7. Insert the journal take-up spool in the printer.
8. Cut the receipt paper (when using a 2-ply roll paper) on the
manual cutter.
Tab
9. Close the auto cutter by using the tab. Be sure to check again
that the left side of the paper is aligned with the spool's flange
as shown below.
10. Close the printer cover.
To remove the paper roll, follow the steps below.
1. Be sure the printer is not receiving data and open the printer
cover.
Receipt paper
Setting Up the Printer 1–19